(773) NO-SPOTS
(773) 667-7687
Cleaning Tips    

Carpet Stain Removal Guide - Water-based Stains

Carpet Stain Removal Guide - Greasy, Oil-based Stains


Care Extends Carpet Life:

In days gone by, carpets and rugs were cleaned by taking them outside, hanging them across a line, and beating them. Perhaps you remember this tedious Saturday afternoon chore from your childhood. Our mothers and grandmothers may not have understood the cleaning technology behind this work, but they did realize the beneficial results.

The majority of soil in carpet is dry, insoluble, particulate matter. An analysis by Proctor and Gamble Laboratories of carpet soiling samples representing a cross-section from throughout the United States reveals the following data on soil in carpet:

  • Tracked-in, gritty particles make up approximately 55%.
  • Animal fiber from people, pets and fabrics comprise about 12%.
  • Another 12% is vegetable matter and fiber from fabrics, indoor plants, lawn trackings and paper products.

These combine to account for 79% of the soil nestled in carpet fibers. This soil composition varies with geographic location and use of the facility.

This dry soil is often abrasive and can harm carpet fibers if not removed. Under the weight and movement of foot traffic, these particulate soils can scratch and cut carpet fibers, dulling the appearance of the carpet. Abrasive soil is the major cause of carpet wear.

Today most carpet is installed wall to wall, and clotheslines are becoming a thing of the past. We can't beat this particulate soil out of our soft floor coverings, but we can vacuum it out. Frequent, thorough vacuuming is the most important step in a carpet maintenance program. Routine vacuuming enhances the appearance and prolongs the useful life of carpet by lifting the fibers and removing harmful particulate soil.

Proper vacuuming also helps create a healthier indoor environment by removing pollutants such as dust mites and their feces, discarded human skin cells that mites feed upon, mold spores and other biological contaminants collected in the carpet.

The equipment is the first consideration for effective vacuuming. The Institute of Inspection Cleaning and Restoration Certification (IICRC), Vancouver, Washington, the certifying body for professionals achieving levels of proficiency in the cleaning, restoration, and inspection industry, offers these tips on selecting a vacuum cleaner:

Upright vacuum cleaners are generally more efficient than canister models. A top-load vacuum works more efficiently than a bottom-load.

The vacuum cleaner head should be equipped with a beater bar or revolving brush. This mechanical action separates the carpet fibers and lifts the soil for vacuum removal. This duplicates the agitation of beating the rug on the clothesline.

A dual-motor vacuum, utilizing one motor to operate the beater bar and one for the vacuum, is most efficient.

The cleaning objective is to remove as many particles and biopollutants as possible, not to redistribute them into the air to settle back into the carpet and furnishings or be absorbed into the respiratory system. Vacuum cleaners equipped with high efficiency particulate air (HEPA) filtration systems trap tiny particles.

Disposable paper bags are recommended over cloth bags. Cloth bags can become clogged with soil, reducing air flow through the bag.

Replace the beater bar and brushes as they become worn. Have blower fan blades replaced as they abrade.

Replace worn or cracked belts.

Vacuuming is such a common place chore that little thought is given to how it should be done. The IICRC provides these recommendations:

With vacuuming, more is better. You cannot over vacuum a carpet. Today's carpets are designed to hide soil, so soil is not always visible. Studies conducted by Hoover Vacuum Cleaning Company show that one square foot of carpet can hold up to one pound of dirt and still appear clean.

Thorough vacuuming to remove the pile-damaging soil hidden deep in the carpet takes time. Don't just groom the surface by removing large, noticeable debris.

Adjust the brush or beater bar properly for each carpet height. The brush or bar should touch the carpet.

Empty or replace the bag often. When a bag is half ftill, vacuum efficiency is reduced by 60 to 80%.

Overall vacuuming is needed, but knowing where to concentrate your efforts is more productive. The majority of soil in carpet is brought from outside by foot traffic, so normally the highest concentration of soil is in entrances and high traffic areas.

Hand vacuum the dust and fine particulate soil that builds up around the edges and in the comers of the rooms.

Successful vacuuming requires time, proper technique, and effective equipment. However, even the most meticulous worker with the best vacuum cleaner cannot remove all the soil in carpet. A small percentage of the soil is oil-based. This oily residue bonds the particulate soil left from vacuuming to the carpet fibers and causes the appearance of dirty traffic patterns. Vacuuming is ineffective against this oily buildup. Removal requires the periodic service of a certified professional carpet cleaner.

This article has been provided by your local IICRC certified carpet professional. For ftirther information on proper care of your carpet, call the carpet cleaning company displaying the IICRC logo in their Yellow Pages ad, or call the IICRC Referral System at 1-800-8354624 for the name of a certified cleaner in your neighborhood.

CARE YOU CAN'T BEAT:

In days gone by, carpets and rugs were cleaned by taking them outside, hanging them across a line, and beating them. Perhaps you remember this tedious Saturday afternoon chore from your childhood. Our mothers and grandmothers may not have understood the cleaning technology behind this work, but they did realize the beneficial results

The majority of soil in carpet is dry, insoluble, particulate matter. An analysis by Proctor and Gamble Laboratories of carpet soiling samples representing a cross-section from throughout the United States reveals the following data on soil in carpet

•   Tracked-in, gritty particles make up approximately 55%

•   Animal fiber from people, pets and fabrics comprise about 12%

• Another 12% is vegetable matter and fiber from fabrics, indoor plants, lawn trackings and paper products

These combine to account for 79% of the soil nestled in carpet fibers. This soil composition varies with geographic location and use of the facility

This dry soil is often abrasive and can harm carpet fibers if not removed. Under the weight and movement of foot traffic, these particulate soils can scratch and cut carpet fibers, dulling the appearance of the carpet. Abrasive soil is the major cause of carpet wear

Today most carpet is installed wall to wall, and clotheslines are becoming a thing of the past. We can't beat this particulate soil out of our soft floor coverings, but we can vacuum it out. Frequent, thorough vacuuming is the most important step in a carpet maintenance program. Routine vacuuming enhances the appearance and prolongs the useful life of carpet by lifting the fibers and removing harmful particulate soil

Proper vacuuming also helps create a healthier indoor environment by removing pollutants such as dust mites and their feces, discarded human skin cells that mites feed upon, mold spores and other biological contaminants collected in the carpet

The equipment is the first consideration for effective vacuuming. The Institute of Inspection Cleaning and Restoration Certification (IICRC), Vancouver, Washington, the certifying body for professionals achieving levels of proficiency in the cleaning, restoration, and inspection industry, offers these tips on selecting a vacuum cleaner

Upright vacuum cleaners are generally more efficient than canister models. A top-load vacuum works more efficiently than a bottom-load

The vacuum cleaner head should be equipped with a beater bar or revolving brush. This mechanical action separates the carpet fibers and lifts the soil for vacuum removal. This duplicates the agitation of beating the rug on the clothesline

A dual-motor vacuum, utilizing one motor to operate the beater bar and one for the vacuum, is most efficient

The cleaning objective is to remove as many particles and biopollutants as possible, not to redistribute them into the air to settle back into the carpet and furnishings or be absorbed into the respiratory system. Vacuum cleaners equipped with high efficiency particulate air (HEPA) filtration systems trap tiny particles

Disposable paper bags are recommended over cloth bags. Cloth bags can become clogged with soil, reducing air flow through the bag

Replace the beater bar and brushes as they become worn. Have blower fan blades replaced as they abrade

Replace worn or cracked belts

Vacuuming is such a common place chore that little thought is given to how it should be done. The IICRC provides these recommendations

With vacuuming, more is better. You cannot over vacuum a carpet. Today's carpets are designed to hide soil, so soil is not always visible. Studies conducted by Hoover Vacuum Cleaning Company show that one square foot of carpet can hold up to one pound of dirt and still appear clean.

Thorough vacuuming to remove the pile-damaging soil hidden deep in the carpet takes time. Don't just groom the surface by removing large, noticeable debris.

Adjust the brush or beater bar properly for each carpet height. The brush or bar should touch the carpet.

Empty or replace the bag often. When a bag is half ftill, vacuum efficiency is reduced by 60 to 80%.

Overall vacuuming is needed, but knowing where to concentrate your efforts is more productive. The majority of soil in carpet is brought from outside by foot traffic, so normally the highest concentration of soil is in entrances and high traffic areas.

Hand vacuum the dust and fine particulate soil that builds up around the edges and in the comers of the rooms.

Successful vacuuming requires time, proper technique, and effective equipment. However, even the most meticulous worker with the best vacuum cleaner cannot remove all the soil in carpet. A small percentage of the soil is oil-based. This oily residue bonds the particulate soil left from vacuuming to the carpet fibers and causes the appearance of dirty traffic patterns. Vacuuming is ineffective against this oily buildup. Removal requires the periodic service of a certified professional carpet cleaner.

This article has been provided by your local IICRC certified carpet professional. For ftirther information on proper care of your carpet, call the carpet cleaning company displaying the IICRC logo in their Yellow Pages ad, or call the IICRC Referral System at 1-800-8354624 for the name of a certified cleaner in your neighborhood

YOUR INDOOR ENVIRONMENT:

During the 1960's and 1970's much of our nation's focus was on the pollution of our outdoor environment, but recently our focus has shifted to pollution of our indoor environment.

Concern for fuel economy in the early 1970's led to changes in construction techniques and building design to prevent the loss of temperature-controlled air from buildings. Airtight structures keep air inside, but they also prevent the flow of fresh air from outside. Research by the Environmental Protection Agency (EPA) has determined that our indoor environment has two to five times more pollutants than outside air.

The quality of our indoor air has become more important to us in recent years in that the average American spends over 20 hours a day inside a closed structure. We spend 90 percent of our lives indoors. Heightened consumer health awareness has placed an emphasis on improving the quality of our indoor environment.

Carpet plays a vital, positive role in indoor air quality. It acts as an environmental filter, trapping and holding impurities from the air we breathe. The EPA and carpet industry findings indicate that with proper ventilation of new carpet, carpet itself does not contribute negatively to indoor air quality, but the buildup of soil in carpet does. Upholstery fabric also harbors soil and contaminants.

According to Michael A. Berry, Ph.d., former Deputy Director for the EPA Environmental Criteria and Assessment Office, the single leading cause of poor indoor air quality in built environments today is poor maintenance. Carpet and upholstery must be cleaned to remove trapped contaminants before they overflow and are released back into the indoor air.

For a healthier indoor environment, the Institute of Inspection, Cleaning and Restoration Certification (IICRC) recommends:

Vacuum frequently A vacuum cleaner with a high efficiency filtration bag removes soils and bio-contaminants from carpet and upholstery and reduces the release of respirable particles into the air. These bags are now available for most models of vacuum cleaners at retail stores that carry vacuum cleaners and accessories.

Periodically have carpet and upholstery professionally cleaned. Thorough cleaning removes soil and pollutants to improve indoor air quality. Contact your local IICRC Certified cleaner or call the IICRC Referral System toll free line, 1-800-835-4624, to locate an IICRC Certified professional trained in the proper use of cleaning agents and equipment.

Control the sources. Entrance mats halt tracked-in soil and contaminants. Tobacco smoke, which is trapped in carpet and upholstery fabric, is a major source of indoor pollution.

Increase fresh air flow. Our ancestors knew what they were doing when they opened windows to air out buildings.

Clean for health. Carpet and upholstery fabric hide soil. Don't just clean for appearance when the accumulation of soil becomes visible.

Carpet Stain Removal Guide - Water-based Stains

Step1

  • Use a spoon or dull knife to remove solid materials.
  • For large stains, work from the outside of stain to the center to prevent spreading.
  • Blot up liquid spills with a white towel or paper towel.
  • Mix a solution of 1/4 teaspoon of clear hand dishwashing detergent with 1 cup of water. Stir gently.
  • Apply detergent solution directly to a white cloth. Dampen the carpet fibers in the stained area with the cloth. Avoid
    saturating the carpet.
  • Wipe gently. Turn cloth frequently. Never rub, scrub or use a brush. This may damage carpet fibers.
  • If necessary, use your fingertips to work the solution to the base of the stain.
  • Wet the stained carpet fibers with clear, lukewarm water to rinse.
  • Cover the spot with an absorbent white towel or paper towel and apply pressure to blot.
  • Repeat the rinsing and blotting procedures until you are sure all traces of the detergent have been removed.
  • If the stain is gone, place an absorbent white towel or paper towel over the area cleaned, and weigh towels down
    with a heavy, color-fast object, such as a weighted plastic wastebasket.
  • Change towels or paper towels until carpet dries.
  • If stain remains, proceed to Step 2.

Step2

Do NOT use on coffee, tea or urine stains.
  • Mix 2 tablespoons of non-bleaching, non-sudsing household ammonia with 1 cup of lukewarm water.
  • Apply ammonia solution, rinse and blot as outlined in Step 1.
  • Do not dry with paper towels. Proceed to Step 3 to neutralize the ammonia solution.

.Step3
  • Mix 1 cup of white vinegar with 2 cups of water.
  • Apply vinegar solution, rinse and blot as outlined in Step 1.

Carpet Stain Removal Guide - Oil-based Stains

Step1

  • Mix 2 tablespoons of non-bleaching, non-sudsing household ammonia with 1 cup of lukewarm water.
  • Apply ammonia solution, rinse and blot as outlined in Step 1.
  • Do not dry with paper towels. Proceed to Step 3 to neutralize the ammonia solution.

Step2
  • For large stains, work from the outside of stain to the center to prevent spreading.
  • Blot up liquid spills with a white towel or paper towel.
  • Mix a solution of 1/4 teaspoon of clear hand dishwashing detergent with 1 cup of water. Stir gently.
  • Apply detergent solution directly to a white cloth. Dampen the carpet fibers in the stained area with the cloth. Avoid saturating the carpet.
  • Wipe gently. Turn cloth frequently. Never rub, scrub or use a brush. This may damage carpet fibers.
  • If necessary, use your fingertips to work the solution to the base of the stain.
  • Wet the stained carpet fibers with clear, lukewarm water to rinse.
  • Cover the spot with an absorbent white towel or paper towel and apply pressure to blot.
  • Repeat the rinsing and blotting procedures until you are sure all traces of the detergent have been removed.
  • If the stain is gone, place an absorbent white towel or paper towel over the area cleaned, and weigh towels down with a heavy, color-fast object, such as a weighted plastic wastebasket.
  • Change towels or paper towels until carpet dries.
  • If stain remains, proceed to Step 3.

Step3

Do NOT use on coffee, tea or urine stains.
  • Mix 2 tablespoons of non-bleaching, non-sudsing household ammonia with 1 cup of lukewarm water.
  • Apply ammonia solution, rinse and blot as outlined in Step 1.
  • Do not dry with paper towels. Proceed to Step 4 to neutralize the ammonia solution.

Step4
  • Mix 1 cup of white vinegar with 2 cups of water.
  • Apply vinegar solution, rinse and blot as outlined in Step 1.

Back to Top

 
Sign Up For Our Newsletter
Name: Email:
Carpet Cleaning | Upholstery Cleaning | Oriental Rug Cleaning | Area Rug Cleaning | Pet Odor Removal | Asthma Allergy Relief
Air Duct Cleaning | Green Carpet Cleaning | Chicago Carpet Cleaning | Mattress Cleaning | Mattress Sanitizing
2016 - Jonny On The Spot. www.nospots.net. All rights reserved. Powered by One IMS